Skip to content

RA · Foundations

Operational technology and cyber-physical security: what to learn, in what order, and why

A learning guide to operational technology and cyber-physical security: the systems, the threats, key standards, a suggested study order and recorded learning.

As of
17 November 2026
Lektüre
11 minutes
Evidenz
10 sources, cited in order
Stufe
Introductory to intermediate
Lernzeit
15 minutes
NEXUS TWIN · WF-1 · NETWORKSEED da077543RA-F02.DISCIPLINE.OT-CYBER-PHYSICAL-SECURITYxyzSCHEMATIC · NETWORKST-01 · 0.292 0.462ST-03 · 0.287 0.292
WF-1 · network Schematic wireframe twin (network, cyber and attack paths). An illustration, not data.

What you will be able to do

  • Say what counts as operational technology and why its security differs from office IT.
  • Name the twelve tactics of the ICS matrix and say what is distinctive about two of them.
  • Describe layers of defence around a physical process.
  • Name the main standards, guidance and laws and say who each is for.
  • Find the courses of the discipline and read their pages for what is open.
Stufe
Introductory to intermediate
Lernzeit
15 minutes
Before you start
The learning guide to the Faculty of Technology and Digital Systems, or equivalent background
MITRE ATT&CK for ICS
12
tactics in the ICS matrix, from initial access to impact2
NIS2 Directive
18
critical sectors in a unified EU framework3
NCSC secure connectivity
8
principles for operational technology connectivity4

01What operational technology and cyber-physical security covers

What operational technology and cyber-physical security covers

Operational technology and cyber-physical security is the Academy discipline of operational technology and cyber-physical security, one of the disciplines of the Faculty of Technology and Digital Systems. On the Academy's own description, when control systems are attacked the consequences are physical: a breaker opens, a pump stops, a process runs out of its safe envelope. The discipline covers securing the systems that move valves, breakers and machines.

It sits in the Department of Cyber, Digital and Space Systems and borders cybersecurity and digital resilience, digital public infrastructure and positioning, navigation and timing resilience. Its subtopics include industrial control systems and SCADA, the IEC 62443 series, safety and security co-engineering, network segmentation and the Purdue model, and incident response in industrial environments.

02Why a stopped pump is not a lost file

Why a stopped pump is not a lost file

In an office, a cyber incident usually costs data or time. In a plant, a hospital or a ship, it can change the state of a physical process. Safety, availability and security have to be weighed together, and a fix that suits an office computer may be unsafe on a controller.

NIST frames the problem as guidance on how to secure operational technology while addressing its unique performance, reliability and safety requirements. The same document provides an overview of OT and typical system topologies, identifies common threats and vulnerabilities, and recommends security countermeasures 1.

Public bodies treat the topic as a matter of resilience. The ENISA page on critical sectors says the updated NIS2 Directive focuses on enhancing the resilience of critical sectors across the EU to ensure the security and continuity of essential services 5.

03A suggested learning order in four stages

A suggested learning order in four stages

The Academy describes study at four levels: introductory, intermediate, advanced and integrative. The four stages below follow the same climb, but they are about subjects, not levels.

Stage one: the systems. Learn what OT is and how a plant or site is built. NIST lists industrial control systems, building automation systems, transportation systems, physical access control systems and physical environment monitoring and measurement systems as examples of OT 1. The guide to technology and digital systems gives the wider field.

Stage two: the threats. Study how attacks on control systems work. The MITRE ATT&CK Matrix for ICS organises tactics and techniques into twelve tactics: Initial Access, Execution, Persistence, Privilege Escalation, Evasion, Discovery, Lateral Movement, Collection, Command and Control, Inhibit Response Function, Impair Process Control and Impact 2.

Stage three: standards and guidance. Read the main texts. The ISA/IEC 62443 series defines requirements and processes for implementing and maintaining electronically secure industrial automation and control systems, and takes an approach that bridges operations and information technology and process safety and cybersecurity 6. The UK National Cyber Security Centre publishes guidance on creating and maintaining a definitive view of OT architecture and secure connectivity principles for OT 4.

Stage four: law and sector practice. Study how rules differ by sector. The NIS2 Directive applies across 18 critical sectors 3 and the Cyber Resilience Act aims to make sure all digital products are safe from cyber threats 7. The discipline's courses extend it.

The order is a suggestion. An engineer may begin at stage three; a risk manager may begin at stage four. What matters is that each new idea has the ideas beneath it in place.

Fig. 01Four stages of study in operational technology security

Four stages of study in operational technology securityA rising ladder of four steps: the systems, the threats, standards and guidance, and law and sector practice, each with the documents a learner meets at that step.01The systemsOT, ICS, NIST SP 800-8202The threatsATT&CK for ICS03Standards and guidanceISA/IEC 62443, NCSC04Law and sector practiceNIS2, CRA, sector rules
The suggested learning order of this guide, with the documents and bodies that anchor each stage 1,2,6,3. The order is a suggestion, not a required curriculum.1,2,6,3Sources: NIST; MITRE; ISA; European Commission. Figure CC BY 4.0. As of 17 November 2026.
Figure 1 in words

Four steps rise from left to right. Step one, the systems: operational technology and industrial control systems in NIST SP 800-82. Step two, the threats: the twelve tactics of the MITRE ATT&CK Matrix for ICS. Step three, standards and guidance: ISA/IEC 62443 and the NCSC principles. Step four, highlighted, law and sector practice: NIS2, the Cyber Resilience Act and sector rules.

04Layers around a physical process

Layers around a physical process

Figure 2 shows a defence as layers around a physical process. At the centre is the process itself and its safety system. Around it are the control devices, then the control network, then the boundary to the rest of the site, and last the connections to the enterprise and to outside parties.

The NCSC principles map onto this picture. They include limiting the exposure of your connectivity, hardening your OT boundary, limiting the impact of compromise, ensuring all connectivity is logged and monitored, and establishing an isolation plan 4. The isolation plan is the last resort: a way to cut the outer layers off so that the inner layers can keep running safely.

Fig. 02Layers around a physical process

Layers around a physical processFive nested layers from the outside in: connections to the enterprise and outside parties, the boundary to the rest of the site, the control network, the control devices, and the physical process with its safety system.01OutsideEnterprise and outside parties02GrenzeSite boundary and gateways03NetzControl network04DevicesControllers and field devices05VerfahrenPhysical process and safety system
A defence in layers as described in this guide. The NCSC principles include hardening the OT boundary, limiting the impact of compromise and establishing an isolation plan 4. The layers are a teaching frame.4Sources: UK NCSC. Figure CC BY 4.0. As of 17 November 2026.
Figure 2 in words

Five layers stacked from the outside in. One, connections to the enterprise and to outside parties. Two, highlighted, the boundary to the rest of the site. Three, the control network. Four, the control devices. Five, the physical process and its safety system. An isolation plan lets the outer layers be cut off so that the inner layers keep running safely.

05Six core ideas every learner should hold

Six core ideas every learner should hold

Six ideas carry most of the weight in this discipline. Each is simple to state and takes practice to use.

Safety and security are linked. The ISA/IEC 62443 approach bridges process safety and cybersecurity 6.

OT has its own requirements. Performance, reliability and safety shape what controls are possible 1.

Know your assets. Guidance starts with a definitive record of the OT architecture 4.

Limit connectivity. Fewer and simpler connections mean fewer paths for an attacker 4.

Attacks aim at process effects. The ICS matrix includes tactics that inhibit response functions and impair process control 2.

Rules differ by sector. The NIS2 Directive covers energy and transport among 18 sectors 3; the FDA addresses the cybersecurity of medical devices 8; the IMO addresses maritime cyber risk in shipping 9.

06Worked example: why segmentation limits spread

Worked example: why segmentation limits spread

Worked example (teaching values): the numbers in this section are invented for teaching and describe no real plant. A site has a hundred and twenty control devices on one flat network. An attacker takes over one office computer that is connected to that network.

Worked example, continued (teaching values): on the flat network the attacker can try to reach all hundred and twenty devices. The site is then rebuilt with ten zones of twelve devices, joined through controlled gateways. The same office computer, now outside the zones, has no direct path to any of them, and a compromise of one zone exposes twelve devices, not a hundred and twenty.

The lesson is that structure limits harm. Segmentation does not stop the first compromise, but it limits how far it spreads and how much needs isolating. Stage three teaches how standards and guidance describe segmentation, and stage four how regulators expect it to be used.

07Canonical references and bodies to know

Canonical references and bodies to know

A learner in this discipline should know a short list of references, what kind of evidence each holds and how often it is renewed. Primary documents come first; summaries are useful only after them.

For guidance on securing OT: NIST SP 800-82 1 and the NCSC collections 410. For standards: the ISA/IEC 62443 series 6. For threat knowledge: MITRE ATT&CK for ICS 2. For EU law and agency work: NIS2, the Cyber Resilience Act and ENISA 375. For sector rules: the FDA on medical devices 8 and the IMO on maritime cyber risk 9.

08How to read a standard or guidance

How to read a standard or guidance

A learner meets standards and guidance early and reads them badly if nobody explains their shape. Three habits help. First, find the status and the revision. The NIST page shows Revision 3 as published in September 2023 and carries a planning note, dated 21 September 2026, pointing to an initial public draft of Revision 4 with comments due by 30 November 2026 1.

Second, find who the text is for and what it binds. The NIS2 page describes a directive that requires Member States to enhance cybersecurity capabilities and introduces risk management measures and reporting requirements for entities from more sectors 3. The ISA page describes a series of standards that set best practices and provide a way to assess security performance 6. Third, find the date and write it beside any statement you take from the text.

09Skills that make the knowledge usable

Skills that make the knowledge usable

Knowledge becomes useful through a small set of skills. The discipline treats these as its practical core.

Reading a process diagram. Find what moves, what controls it and what protects it. Building an asset record. List devices, links and owners. Mapping attacks to a plant. Use a matrix to ask what could be done to this process. Segmenting. Draw zones and gateways and say why. Planning isolation. Decide in advance what is cut and in what order. Working with engineers. Put safety first and explain security in their terms.

10How expertise is shown at the Academy

How expertise is shown at the Academy

Expertise in this field is shown by work that others can check. The Academy records learning, not credentials.

Finishing a course gives a completion record. It is not a certificate, an accreditation or a qualification, and it does not state that a person is competent in a profession. Achievements on the Academy recognise assessed learning only.

The course catalogue page for this discipline lists two courses: Operational technology and cyber-physical security: foundations and practice, at the intermediate level, and Operational technology and cyber-physical security: frontier methods, at the advanced level. On 17 November 2026 the page shows both as planned, and the discipline page lists no courses yet. The studios page for technology and digital systems also describes an integrative-level team studio for the department, which takes one real place through its disciplines and ends in a decision brief. The catalogue says the NXS Learning catalogue lists every open course and is where you enrol, so this guide does not point to an Academy course as a place to enrol. Check the catalogue before you plan.

Outside the Academy, the strongest evidence of expertise is a body of work. Examples are a documented asset and connectivity record for a public or model site that cites its sources and dates, a mapping of threats to a process, or a clear brief that a reviewer has checked. Keep such a record from your first course.

11Emerging areas to watch

Emerging areas to watch

Several areas are changing what an OT security professional needs to know. Each is a place to read on once the core is in place.

Guidance revisions. NIST has issued an initial public draft of Revision 4 of SP 800-82 1. Connected products. The Cyber Resilience Act addresses the inadequate level of cybersecurity in many products and the lack of timely security updates 7. Medical devices. The FDA says designing cybersecurity into medical devices from the beginning increases their ability to remain cybersecure over the product life cycle 8. Shipping. The IMO encourages administrations to address cyber risks in existing safety management systems 9.

Related work across the Nexus network gives wider context. See the field page of The Global Centre for Risk and Innovation (GCRI) on cyber, the page of The Global Risks Forum (GRF) on AI and digital governance and the proposed Nexus Standards for energy and infrastructure. These pages describe programmes and proposals. A link to them implies no endorsement of the sources this guide cites.

What this guide does not claim: it is suggested learning, not a curriculum that anyone must follow, and it is not engineering, legal or professional advice, and it is not a guide to testing or attacking any system. It reports figures as their issuers published them and draws no new estimates from them; the only invented numbers are the labelled teaching values. It names bodies and standards for learning without implying any partnership. Risk Academy does not certify competence, and a completion record is not a professional qualification. The Nexus Standards are proposed and in draft, not adopted. The Academy records no partners, cohorts or learner outcomes for this discipline, and this guide implies none.

Fragen

Fragen und Antworten

Where should a complete beginner start in operational technology security?

Start with stage one, the systems. Read the NIST overview of what counts as operational technology, then draw the layers around one process you know. Check the course catalogue for the discipline before you plan, because both Academy courses were shown as planned on 17 November 2026.

How is OT security different from IT security?

Operational technology interacts with the physical environment, so safety and availability shape what controls are possible. NIST describes guidance for securing OT while addressing its unique performance, reliability and safety requirements. A change that suits an office system can be unsafe on a controller.

What is IEC 62443?

A series of standards that define requirements and processes for implementing and maintaining electronically secure industrial automation and control systems. The ISA describes an approach that bridges operations and information technology, and process safety and cybersecurity.

Does the NIS2 Directive apply to every operator?

No. NIS2 applies to entities in defined critical sectors, and organisations are classified by factors such as size, sector and criticality. Check the national law that carries the directive in your country before you decide what applies.

Does finishing a course in this discipline give me a professional qualification?

No. A completion record shows that you finished a course. It is not a certificate or a professional qualification, and the Academy does not certify competence. If you need a recognised qualification, check the requirements of the body that awards it.

Nutzungsbedingungen

Glossar

Betriebstechnik
Programmable systems and devices that interact with the physical environment or manage devices that do.
Industrielles Steuerungssystem
A system that monitors and controls an industrial process.
SCADA
Supervisory control and data acquisition: a way to monitor and control sites from a central point.
Zone
A group of devices with the same security needs, joined to others through controlled gateways.
Safety system
Equipment and logic that bring a process to a safe state when something goes wrong.
Isolation plan
A prepared way to cut a system off from outside connections.

Check your understanding

  1. Why can an office security fix be unsafe on a controller?

    Because operational technology has unique performance, reliability and safety requirements that shape what controls are possible.

  2. What does segmentation add to a flat network?

    It limits how far a compromise spreads and how much must be isolated.

  3. Is the NIST guide a law?

    No. It is guidance on securing operational technology. Laws such as NIS2 set legal duties for entities in scope.

Continue with a course

Quellen

Quellen

10 sources, numbered in the order they are first cited
  1. U.S. National Institute of Standards and Technology (2023). SP 800-82 Rev. 3, Guide to Operational Technology (OT) Security. csrc.nist.gov. Accessed 2026-11-17.
  2. MITRE (2026). ATT&CK Matrix for ICS. attack.mitre.org. Accessed 2026-11-17.
  3. European Commission (2026). NIS2 Directive: securing network and information systems. digital-strategy.ec.europa.eu. Accessed 2026-11-17.
  4. National Cyber Security Centre (United Kingdom) (2026). Operational Technology guidance collection. www.ncsc.gov.uk. Accessed 2026-11-17.
  5. EU Agency for Cybersecurity (ENISA) (2026). Cybersecurity of critical sectors. www.enisa.europa.eu. Accessed 2026-11-17.
  6. International Society of Automation (2026). ISA/IEC 62443 Series of Standards. www.isa.org. Accessed 2026-11-17.
  7. European Commission (2026). Cyber Resilience Act. digital-strategy.ec.europa.eu. Accessed 2026-11-17.
  8. U.S. Food and Drug Administration (2026). Cybersecurity of medical devices. www.fda.gov. Accessed 2026-11-17.
  9. International Maritime Organization (2026). Cyber risk management. www.imo.org. Accessed 2026-11-17.
  10. National Cyber Security Centre (United Kingdom) (2026). Cyber Assessment Framework. www.ncsc.gov.uk. Accessed 2026-11-17.

Eintrag

Editorial record

Facts and course states are given as of 17 November 2026. This guide is reviewed at least every 270 days and whenever a cited source publishes a new edition or a course of the faculty opens.

Published by the Academy desk of Risk Academy. To report an error or request a correction, write through the Risk Academy contact page; corrections are dated and listed with the page. The Academy's statement on AI use explains how AI assistance is used and reviewed. Text, visuals and data are licensed CC BY 4.0, except where a cited source states other terms.

Cite this article

Academy desk, Risk Academy (2026, November 17). Operational technology and cyber-physical security guide. Risk Academy. https://risksacademy.com/technology-digital/learning-operational-technology-and-cyber-physical-security-guide/

Republish

Republish or translate this article free of charge, in print or online, under CC BY 4.0: keep the byline and Risk Academy, link to the original and note any change. Figures, maps and twins made by the institutions carry the same licence; third-party data keeps its own credit line.

Attribution to paste
<p>Operational technology and cyber-physical security: what to learn, in what order, and why — Academy desk, Risk Academy, Risk Academy. First published 17 November 2026 at <a href="https://risksacademy.com/technology-digital/learning-operational-technology-and-cyber-physical-security-guide/">https://risksacademy.com/technology-digital/learning-operational-technology-and-cyber-physical-security-guide/</a>. Republished under CC BY 4.0 (https://creativecommons.org/licenses/by/4.0/).</p>

Anteil

EmailLinkedInBlueskyMastodon